久久-日日操操-欧美va亚洲va-亚洲熟区-涩涩视频免费-丁香婷婷久久久综合精品国产-99涩涩-风间由美av在线-性欧美久久久-欧洲一二三区-国产精品伦一区二区三级古装电影

Product details

Product details

The TS-TC series thermocouple signal isolator accepts the thermocouple signal from the field, and outputs the standard current/voltage signal to the control room, PLC, display instrument and DCS, etc.

Through the miniUSB interface to connect the PC host computer to the input signal division number, range range, alarm output value; Output range, type, etc. RS485 communication function (need to be customized)

The product needs independent power supply, using DIN35mm standard guide rail independent installation mode (optional bus power supply function); The input, output and power supply are isolated from each other.

Product parameter

Product parameter

Input end

Input signal: 4-20mA

Distribution voltage: Open circuit voltage ≤25VDC Voltage at 20mA:>15V 

Distribution working current: <25mA 

Input impedance: ≤50Ω

Output end

Output signal: 4-20mA

Output load resistance :RL≤500Ω(output current signal); 

Basic parameter

Power supply : DC24V, ±10% voltage range :DC18~32V

Consumption current : ≤50mA(1 in 1 out, 24V power supply, 20mA output)

Basic accuracy : 0.1%F.S 

Temperature drift : 0.005%F.S/℃ (-20℃~+55℃)

Response time : ≤10mS(0-90%)(TYP)

Insulation strength :1500V AC/1min (Between input, output and power supply)

Insulation resistance : >100MΩ (Input, output, power supply)

Operating temperature range : -20~+55℃

Electromagnetic compatibility: According to GB/T18268.1(IEC61326-1)

Applicable field equipment: Two-wire and three-wire transmitters, voltage source, current source signals

Use environment

(1) There must be no electromagnetic induction in the surrounding environment such as strong vibration, impact, large currents and sparks. The air should not contain media that corrodes chromium, nickel, and silver coatings, and should not contain flammable and explosive substances; 

(2) Storage temperature: -40℃~+80℃;

(3) Relative humidity: 10%~90%RH;

Wiring diagram

Wiring diagram

Note:

1. When the thermocouple is input, the compensation wire should be directly connected to the input terminal, and the conductor of other materials should not be connected in the middle, otherwise the measurement error will be caused.

2, the bus power supply and RS485 output function is optional, if necessary, please specify and purchase the bus power supply module when ordering. The TS-TC5XX has no 485 output function.